CURBY GIRL TUT

CURBY GIRL TUT:

This tutorial has been written by
©Rie’s Dezines on April 26, 2017
This is from my own creations and ideas if there is
any resemblance to any others it’s just a coincidence.
You may share my blog links with others but you may
not steal and place it on any website without
my permission. 

B4YQ-Y3AF-LXXY-JSCD

Before we begin:

You are under no circumstances allowed to post this on a website, social network, or blog. By doing this you are in direct violation of my copyright and if found will be prosecuted. DO NOT TRY IT!
Any scrapkit of your choosing. I used a PTU called Curby Girl
and a tube I used PTU © Ismael Rac with license from him but his stuff is now @ S&CO

Please feel free to make your tag anyway you like . It is not a requirement to follow my tuts exactly!

Step 1:

Save often so you do not lose your work.

Settings will remain the same unless specified.

Open scrap kit and extract to folder.

Open new image 500 X 500 transparent.

Find your tube of choice and minimize for later.

If using the same kit then I picked MD paper 4.

Right click copy/paste into new image as new layer and close.

Step 2:

Open MD frame3 or a frame of your choice.

Copy/paste into your image as new layer and close.

Image resize to 85%.

Make sure resize all layers is unchecked. Click OK.

Step 3:

Effects/Drop shadow 10.10.50.5.00 black. Click OK.

Maximize your tube copy/paste into your image as new layer. Close.

Image resize 85%. Image resize again to 80% Place to the left like mine.

Add drop shadow same settings.

Step 4:

Open elements I used element MD6. Copy/paste into your image.

Place around the top of the image. Make sure you place under your frame.

Add drop shadow same settings as above.

I used element MD 47 resize to 85%.

Place over on the right side like mine. Add drop shadow.

Step 5:

I used element MD 63. Copy/Paste into your image.

Resize to 45%. Add drop shadow.

Place in tag behind car and Dawn tube like mine.

Next I chose element MD 38. Copy/Paste into your image.

Resize to 30%. Add drop shadow. Move to lower left hand corner so nothing

but the bush and stems are showing behind Dawn and frame.

I went with element MD 51. Copy/Paste into your image.

Resize to 30%. Add drop shadow. Place on the right side about mid tag.

Step 6:

Pick element MD 46. Copy/Paste into your image.

Resize to 20%. Add drop shadow. Place on the top of the MOTEL sign.

Image Mirror Horizontal.

Choose element MD 48. Copy/Paste into your image.

Resize to 30%. Add drop shadow.

Place on left side in front of car under MOTEL sign.

I used element MD 71. Copy/Paste into your image.

Resize to 30%. Add drop shadow.

Place in upper right hand corner in front of the building background.

Step 7:

Add copyright information.

License number and artist/designer copyright information.

Choose font place name and save.

Font I used was Wedding Text.

I hope you have enjoyed this tut.

April 2017

Hello,

It is time for an update since it has been so long. As many already know both me & hubby were involved in a serious car accident last year on June 8, 2016. Exactly, 2 days after our anniversary of 5 years married but together 6 years. It has been quite a struggle for us over the past 10 months. I had to endure 5 1/2 months of physical therapy & it took me almost a month to heal enough for the pt doctor to be able to start working on me from all the swelling & damage caused by the accident. Now that I have been removed from a field of area I enjoyed so much doing I am having to start all over again & not having much success. Hubby was able to get a job but a 1 person income is hard when you have bills constantly. We are survivors & will continue to strive forward no matter what life throws at us. I will post another update on or after April 12th!!!!

Rie's Personal Introduction!

Welcome to my page feel free to look around and follow. My name is Rie aka Rie's Dezines. I have been doing psp things for 19 yrs now I think. I write tuts for myself, or different CT's I am apart of. I am 100% CC so I hold many licenses from many different companies that are either still around, or have closed. DO NOT THINK I WILL GIVE YOU FREE THINGS THAT I PAID FOR BECAUSE THAT'S AGAINST ALL ARTISTS & LICENSING COMPANIES TOU'S. I am going to be selling ScrapKits here soon. If you have any questions you can send me an email @ rieb6611@gmail.com I am in the process of making changes often adding, changing things around on my page so please bear with me.

Rie & Leon's Update. New in 2017

Last year started out with some wonderful news. Our only daughter Sara who is in the military and married to her wonderful husband Michael have made the beginning of life ahead of them. We became grandparents for the first time to our wonderful precious Serenity Eliisa Micara Lopez. She was born on January 24, 2017  @4:42 pm PST. She was 18 inches 6lbs 4oz. We are so proud of both of them. We love you and see you soon!

Precious Pink

Precious Pink

I made this TUT using PSP X2

However any version can be used (some may need changes).

This tutorial has been written by ©Rie on August 8, 2013.

This is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence.

You may share my blog links with others but you may not steal and place it on any website without my written permission.

Before we begin you will need the following:

A working knowledge of PSP.

Any scrapkit of your choosing.

I used a FTU kit called HeartBreaker 

Tube I used PTU © bitsnbobs with license from PFD

Step 1:

Save often so you do not lose your work.

Settings will remain the same unless specified.

Open scrapkit and extract to folder.

Open new image 500 X 500 transparent.

Find your tube of choice and minimize for later.

If using the same kit then chose paper 2.

Right click copy/paste into new image as new layer and close.

Step 2:

Open frame heart or a frame of your choice.

Copy/paste into your image as new layer and close.

Image resize to 75%. Make sure resize all layers is unchecked. Click OK.

Step 3:

Effects/Drop shadow 10.10.50.5.00 black. Click OK.

Maximize your tube copy/paste into your image as new layer. Close.

Image resize 30%.

Place in the middle like mine.

Add drop shadow same settings.

Step 4:

Open elements I used Hearts2. Copy/paste into your image.

Place up on the top of your image.

Add drop shadow same settings as above.

I used Bunny resize to 30%. Place on left hand side of frame like mine is. Add drop shadow same settings as above.

Step 5:

I used Heart3. Copy/Paste into your image.

Resize to 30%. Place in lower right hand corner of frame like mine.

Add drop shadow same settings. I used Heart1. Copy/Paste into your image. Resize to 30%. Place in lower left hand corner of frame like mine. Add drop shadow same settings. I used Mailbox. Copy/Paste into your image. Resize to 30%. Place in lower right hand corner of tag like mine. Add drop shadow same settings.

Step 6:

Add copyright information.

License and your tag information.

Choose font place name and save.

Font I used was Showcard Gothic.

I hope you have enjoyed this tut.

Monique CT tags

Using PTU Morticias Kitchen Of Hell 10.2013

CT Tag Monique

CT tag #2 from Morticias Kitchen Of Hell PTU SK. 10.2013

CT Tag 3 for Monique

PTU kit My Party Bad To The Bone from Monique at Scrapjoy Kits! 10.2013

Celinart Christmas Angel CT Tag

Update 10.1.13

Hello everyone,

Leon and I have been very busy together. I have put in a job app to work in human resources at Walmart since I have an MBA. I am in gr8 hopes that this will come through the only bad thing is I will be days and he will be nights but better pay for me. If I do not get the HR position then it will be nights there with my husband on same schedule. My bestie is getting married November 15th @ 11:00 am and she has asked me to come help her get ready and for us to photography on the wedding. I am working on putting my family tree together as well so hopefully it will allow me to find out more on my family that I didn't already know. I have finished my school and now staying on my husband to do his schooling so he can get bk into the medical field. Until the next update keep lurking around my blog as I am always putting up new tuts and things.

Hugs ~Rie & Leon~ 

New Update on my blog

Well I am getting ready to start back on my degree for my MBA. What fun right. I will be gone for a month away from my husband taking care of my mom after her surgery. It will be hard but we can do this. I hope that everyone has fun and checks my blog and mine an d my husbands as we will be keeping it updated on the one we did together. here is the link to that one if you would like to go check it put we have a guestbook you can leave a message on if you wish as well. Until next time have fun. Rie & Leon

Rie and Leons update

I am updating my blog again. I will be writing tuts again soon and posting them here. As of June 6th me and Leon will be getting married. I have never been more happier. I have ordered my wedding dress and shoes and they are both beautiful. I will be adding more as time goes on about us in the future. I love you with all of my heart Leon! I have added pictures of me and him and Winston and Lady and her babies...

Rie & Leon

I have not posted on here as of yet. So I figured it was time to do just that. As some know I am currently in the process of leaving the person I spent 11 yrs with because we have grown apart. In the process I met the love of my life in July last year. I will be moving to Texas with him Feb 1st. I have never felt this way about anyone in my entire life. Everyday I fall in love with him even more. My hopes is that we have a wonderful life full of happy memories. He is in the medical field and we are going to try to have a baby together. I have 5 cats and he has 1 dog Winston a pug. My 2 youngest cats are not fixed and my female Lady is going into heat so Cal is working on getting him some booty. I foresee a litter in the future.... Anyway back to me and Leon he has already asked me to be his wife so our wedding will be soon I will keep you posted on that as well. I will have to keep up on everything now. Talk soon!!!! Rie

Trishas Realm

TrishasRealm

I made this TUT using PSP X2

However any version can be used (some may need changes).

This tutorial has been written by ©Rie on June 25, 2013.

This tut was written for my CT.

This is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence.

You may share my blog links with others but you may not steal and place it on any website without my permission. This has been copyrighted so please do not use illegally.

MCN:  CLYZF-QGSKE-11QA6

Before we begin you will need the following:

A working knowledge of PSP.

Any scrapkit of your choosing.

I used a PTU kit called TrishasRealm 

Tube I used PTU © PinUpToons with license from CDO

Step 1:

Save often so you do not lose your work.

Settings will remain the same unless specified.

Open scrapkit and extract to folder.

Open new image 500 X 500 transparent.

Find your tube of choice and minimize for later.

If using the same kit then chose paper 4.

Right click copy/paste into new image as new layer and close.

Step 2:

Open frame1 or a frame of your choice.

Copy/paste into your image as new layer and close.

Image resize to 65%. Make sure resize all layers is unchecked. Click OK.

Step 3:

Effects/Drop shadow 10.10.50.5.00 black. Click OK.

Maximize your tube copy/paste into your image as new layer. Close.

Image resize 65%.

Place to the left like mine.

Add drop shadow same settings.

Step 4:

Open elements I used element19. Copy/paste into your image.

Resize to 35%. Place up on the left hand top corner of frame.

Add drop shadow same settings as above.

I used element47 resize to 90%.

Place behind tube and frame. Erase what is showing outside frame.

Step 5:

I used element4. Copy/Paste into your image.

Resize to 30%. Place in lower right hand corner of frame like mine.

Image free rotate left, free 45.00.

Add drop shadow same settings.

Step 6:

Add copyright information.

License and your tag information.

Choose font place name and save.

Font I used was Vivaldi.

I added a border to mine as well select border with magic wand effects inner bevel.

Selections. Select None.

I hope you have enjoyed this tut.

Sexy Ahoy 8.11.13

Sexy Ahoy

I made this TUT using PSP X2

However any version can be used (some may need changes).

This tutorial has been written by ©Rie on August 11, 2013.

This is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence.

You may share my blog links with others but you may not steal and place it on any website without my written permission.

Before we begin you will need the following:

A working knowledge of PSP.

Any scrapkit of your choosing.

I used a PTU kit called Devilish Dezines Ahoy

                 Tube I used PTU © Sexy Poser with license from Ismel Rac

Step 1:

Save often so you do not lose your work.

Settings will remain the same unless specified.

Open scrapkit and extract to folder.

Open new image 500 X 500 transparent.

Find your tube of choice and minimize for later.

Step 2:

Open element18 or a element of your choice.

Copy/paste into your image as new layer and close.

Step 3:

Effects/Drop shadow 10.10.50.5.00 black. Click OK.

Maximize your tube copy/paste into your image as new layer. Close.

Image resize 70%.

Place in the right hand corner like mine.

Add drop shadow same settings.

Step 4:

Open elements I used Element24 resize to 30%.

Copy/paste into your image.

Place up on the lower left had side of your image.

Add drop shadow same settings as above.

I used element23 resize to 20%. Place on upper right hand side of fence. Add drop shadow same settings as above.

Step 5:

I used element45. Copy/Paste into your image.

Resize to 30%. Place in lower left hand corner of tag by the ship and move down so it’s behind the ship.

Add drop shadow same settings. I used element8. Copy/Paste into your image. Resize to 20%. Place in lower left hand corner behind ship. Add drop shadow same settings. I used element10. Copy/Paste into your image. Resize to 10%. Place in the middle of the fence like mine. Add drop shadow same settings. I also used element42. Resize to 10%. Place in the lower right corner like mine. Add drop shadow same settings.

Step 6:

Add copyright information.

License and your tag information.

Choose font place name and save.

Font I used was Rapscallion.

I hope you have enjoyed this tut.

Victorian Meadows

Victorian Meadow 10.1.13

Victorian Meadow

I made this TUT using PSP X3

However any version can be used (some may need changes).

This tutorial has been written by ©Rie on October 1, 2013.

This is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence.

You may share my blog links with others but you may not steal and place it on any website without my written permission.

Before we begin you will need the following:

A working knowledge of PSP.

Any scrapkit of your choosing.

I used a PTU kit called Devilish Dezines Victorian Meadow

                 Tube I used PTU © Devils-Package-2 with license from Barbara Jensen

Step 1:

Save often so you do not lose your work.

Settings will remain the same unless specified.

Open scrapkit and extract to folder.

Open new image 500 X 500 transparent.

Find your tube of choice and minimize for later.

Step 2:

Open element90 or an element of your choice.

Copy/paste into your image as new layer and close.

Step 3:

Effects/Drop shadow 10.10.50.5.00 black. Click OK.

Maximize your tube copy/paste into your image as new layer.

I used 2 different tubes. Close.

Image resize 40%.

Place in the left hand side of frame like mine.

Do the same thing with your 2^nd tube.

But place on the right hand side of the frame instead.

Add drop shadow same settings.

Step 4:

Open elements I used Element46 resize to 90%.

Copy/paste into your image.

Place up on the left had side of your image so it trails.

Add drop shadow same settings as above.

I used element56 resize to 20%. Place on bottom middle under the frame.

Add drop shadow same settings as above.

Step 5:

I used element12. Copy/Paste into your image.

Resize to 20%. Place in lower right hand corner of tag.

Add drop shadow same settings. I used element13. Copy/Paste into your image. Resize to 20%. Place in lower left hand corner. Add drop shadow same settings.

Step 6:

I used element99. Copy/Paste into your image. Place in the top. Add drop shadow same settings. I also used element80. Resize to 10%. Place in the top left side of frame. Add drop shadow same settings.

Step 7:

I used element81. Copy/Paste into your image. Image/resize to 10%. Place in the top right hand side. Add drop shadow same settings. I also used element22. Resize to 10%. Place in the lower right side of frame. Add drop shadow same settings. I also used element24. Resize to 10%. Place in the frame above lock. Add drop shadow same settings.

Step 8:

Add copyright information.

License and your tag information.

Choose font place name and save.

Font I used was Snap ITC 12 size.

I hope you have enjoyed this tut.