This tutorial has been written by
©RieMRuby&DiamondDezigns on April 1, 2010
this is from my own creations and ideas if there is
any resemblance to any others it’s just a coincidence.
You are not allowed to share or forward this lesson to
anyone and you may not place it on any website without
my permission.
This has been copyrighted so please do not use illegally.
MCN: C6N36-7P8JU-SVJ4W
Lesson 2
Learning to take proper screenshots
Do not share these lessons outside of the group this includes but is not limited to: a blog, website, email or any other form electronic or printed.
Before we begin
This Lesson was written by ©RieMRuby&DiamondDezigns
This Lesson belongs to RubyNDiamondDezigns
You are under no circumstances allowed to post this on a web site or share the lesson outside of this group. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT!
Beginner Lesson 2:
This will teach you how to take proper screenshots!
Here you will be introduced to Snagit! I have found one that actually works well. Screenshots can really enhance your tut!
I am sure you have seen screenshots that were all distorted looking to the point you could not read them properly.
Ok please go here and download the program.
http://www.4shared.com/file/HZo5TfSx/for_screenshots_SNAG_IT.html
(This link came from Rie) DO NOT share it outside the group!
After downloading then unzip it you should see a setup file with a key generator.
Open the key generator copy the serial number have in it.
Now double click the setup so you can install the program.
You will click next each time you will not change anything on the setup.
When the setup is finished a new screen will open up for you.
On the right you find the word unlock now click on it.
If you cannot find it then look for it under Tools.
Place your name and serial # that you copied earlier from the key generator.
On the next screen uncheck copy my software key to the online form now close.
On the next screen make sure you select NO.
You should see a screen asking you to take a tour you can close that.
You should have the Snagit program open on your desktop if you don’t then open it now.
At the top find TOOLS and click the...Program preferences.
Then select program options select: use tray icon.
( Please don't change anything else )
At the tab....Updater options......unselect: enable automated update checking.
( Note ~ DO NOT UPDATE EVER OR IT WON’T WORK ANYMORE) Close all screens now.
Now it is time to play.
Open psp and have an image open in it. You are going to take a screenshot of it. This is how you do it. (ctrl+shift+ P) then hold down your left mouse and drag it to select what you want a shot of.
When you are finished let go of the mouse button and another screen will open with what you just captured.
On the left you see the TOOLS.
These are options for you to use on your screenshots.
So if you wanted to added text like I did on my screenshots above click the A.
Now that you are finished click save-as.
Name it and change to JPEG. See that was not hard.
I am in hopes that you learn to love this program as much as I do.
Huggs, Rie N Chloe
The requirement to pass this lesson:
For this lesson play with your new program.
Do some screenshots in PSP of the following:
Image Resize screen
Effects 3D Effects
Layers New Raster Layer screen
Place text, an arrow or two, and your watermark.
Send these to your MOD
In the Subject line put your name Lesson 2.
After it is approved you will receive lesson 3
Rie
MCN: C6N36-7P8JU-SVJ4W
Lesson 2
Learning to take proper screenshots
Do not share these lessons outside of the group this includes but is not limited to: a blog, website, email or any other form electronic or printed.
Before we begin
This Lesson was written by ©RieMRuby&DiamondDezigns
This Lesson belongs to RubyNDiamondDezigns
You are under no circumstances allowed to post this on a web site or share the lesson outside of this group. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT!
Beginner Lesson 2:
This will teach you how to take proper screenshots!
Here you will be introduced to Snagit! I have found one that actually works well. Screenshots can really enhance your tut!
I am sure you have seen screenshots that were all distorted looking to the point you could not read them properly.
Ok please go here and download the program.
http://www.4shared.com/file/HZo5TfSx/for_screenshots_SNAG_IT.html
(This link came from Rie) DO NOT share it outside the group!
After downloading then unzip it you should see a setup file with a key generator.
Open the key generator copy the serial number have in it.
Now double click the setup so you can install the program.
You will click next each time you will not change anything on the setup.
When the setup is finished a new screen will open up for you.
On the right you find the word unlock now click on it.
If you cannot find it then look for it under Tools.
Place your name and serial # that you copied earlier from the key generator.
On the next screen uncheck copy my software key to the online form now close.
On the next screen make sure you select NO.
You should see a screen asking you to take a tour you can close that.
You should have the Snagit program open on your desktop if you don’t then open it now.
At the top find TOOLS and click the...Program preferences.
Then select program options select: use tray icon.
( Please don't change anything else )
At the tab....Updater options......unselect: enable automated update checking.
( Note ~ DO NOT UPDATE EVER OR IT WON’T WORK ANYMORE) Close all screens now.
Now it is time to play.
Open psp and have an image open in it. You are going to take a screenshot of it. This is how you do it. (ctrl+shift+ P) then hold down your left mouse and drag it to select what you want a shot of.
When you are finished let go of the mouse button and another screen will open with what you just captured.
On the left you see the TOOLS.
These are options for you to use on your screenshots.
So if you wanted to added text like I did on my screenshots above click the A.
Now that you are finished click save-as.
Name it and change to JPEG. See that was not hard.
I am in hopes that you learn to love this program as much as I do.
Huggs, Rie N Chloe
The requirement to pass this lesson:
For this lesson play with your new program.
Do some screenshots in PSP of the following:
Image Resize screen
Effects 3D Effects
Layers New Raster Layer screen
Place text, an arrow or two, and your watermark.
Send these to your MOD
In the Subject line put your name Lesson 2.
After it is approved you will receive lesson 3
Rie
No comments:
Post a Comment